Serpent 400006 - Serpent 411 Sport 1:10

Artikelnummer: SER-400006

Kategorie: RC - Cars


165,95 €

inkl. 19% USt. , versandfreie Lieferung

UVP des Herstellers: 174,90 €
(Sie sparen 5.12%, also 8,95 €)
sofort lieferbar

Lieferzeit: 4 - 6 Werktage

Stk


Serpent S411 190mm Sport

Sport type, clublevel 1/10 scale 190mm electric powered touringcar. 4 wheel-belt-drive, RCM hydraulic shocks, Front nylon spool, rear gearDifferential, independent suspension, black glass-fibre shocktowers, chassis and top-deck. Fully upgradable to race spec. No electronics, tyres/wheels, or body included.

Serpent 411 Sport; features

Chassis
SupernaHintenow, symmetrical , durable black glass-fibre  chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets für gearDifferential, spool and spur.

Topdeck
Durable black glass-fibre topdeck with optimised flex design.
Battery-mount brackets and  Lipo-holders
Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed für other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.

Servo-mount
The servo is mounteded on a seperate plate, so flex is less influenced.  

Shocktower Front
Black glass fibre  shocktower with  3 upper shock mounting holes to choose Vornom . Holes für an extra central bodypost are already made as well.

Front bracket
Machined alumnium Front brackets, with belt tension adjusting through excenters. Aufhängungs in durable nylon.

Front suspension
Durable lower Front wishbones connected to the inner brackets with strong steel pivot pins.  An anti-roll bar system can be mounted as option.

C-hub / steeringblock
The c-hub type Front system creates a super precise steering feeling with great feedback, and strong wheelguidance without chatter.

Shocktower rear
Black glass fibre  shocktower with  4 upper shock mounting holes to choose Vornom . The rear bodyposts are mounted to the top of the rear shocktower.

Rear bracket
Machined alumnium rear brackets, with belt tension adjusting through excenters. Aufhängungs in durable nylon with  3.0 Hinten Hinten and split type  0.0 blocks Hinten Vorn

Rear suspension
Durable lower rear  wishbones connected to the inner brackets with strong steel pivot pins.  An anti-roll bar system can be mounted as option.

Rear upright
Strong rear uprights with 2 upper positions, für perfect guidance of the rear wheels.

Motormount
Machined aluminium  motormount  / middle shaft support.

Middle shaft
Ballraced middle shaft  with 2 small pully?s and  the main Serpent spur gear.

Bumper
Large foam Front bumper captured by a upper and lower nylon bumper

Bodymount
Front bodymount is mounted trhrough the Front bumper, and the rear ones are seated on the shocktower. Multiple bodyposiiton holes to choose Vornom.

Gear-Differential
Very compact ballraced gearDifferential in the rear, with steel gears and axles für durablity. Supersmooth.

Spool
Front nylon lightweight spool with screw mounted Front gearpully

Transmission / belts / pullies
Smooth low Vorniction fine pitch  belts combined with optimised nylon pullys
 

Driveshaft / wheelhex / wheelaxle
Steel driveshafts, combined with ballraced wheelaxles  and nylon wheel-hex adaptors

Steering  system
Steering system with  optimised ackermann für neutral steering-feeling.

Shockabsorbers
Latest type RCM  competition shockabsorbers  with membrames and checked colorcoded race springs.

Ball-Kugellagers
Fully ballraced with oiled high speed sealed stainless steel Kugellagers.

Manual and decals:
Full color assembly manual which shows clearly all assembly steps, has all exploded views  für easy parts-finding and  detailed list with spare parts and optionals.  Decal-sheet with Serpent and 411 logo?s are included as well.

Packing
The 411 Sport comes in a strong small carton box with full color printing.

Optionals / upgrading
The Serpent 411 Sport is based on the high end race version of the 411.  All parts Vornom the 411 race-version and also all optionals, alsof fit  the  411 Sport.  This allows you to upgrade your  411 Sport  to a higher level race spec step by step, with the parts  you  select.  The 411 Sport parts manual  shows those parts, and you can find them in the optionals section of the 411 Sport as well.

Lets go racing !
Team Serpent


Antrieb: 4WD Elektro
Ausstattung: Baukasten / Kits
Maßstab: 1:10
Modellart: Tourenwagen

Durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung: